Cart

3

Raspberry Pi NVMe with SSD Bundle – 256GB- Preloaded RPi OS

59.95 د.ك

The official Raspberry Pi M.2 HAT+ unlocks the true potential of the Raspberry Pi 5 by leveraging its new PCIe interface.

In stock

SKU: EIT-COM-220 Category: Tags:

Description

  • NVMe (Non-Volatile Memory Express) SSD, normally via PCIe bus. These are NOT SATA SSD
  • 2242, mechanical size/dimension, please ensure the size fits the board
  • M.2 M-Key, please make sure the M.2 socket is M-key compatible
  • Cytron Technologies has pre-loaded with the latest Raspberry Pi OS (Bookworm) and is ready to boot up on the Raspberry Pi board.
  • Please DO NOT format it if you intend to use it with the Raspberry Pi board.

 

Note: If your Raspberry Pi board cannot boot directly from the SSD, you will need to update the bootloader, please refer to this tutorial.


 

Raspberry Pi M.2 HAT+ with NVMe SSDs

 

The official Raspberry Pi M.2 HAT+ unlocks the true potential of the Raspberry Pi 5 by leveraging its new PCIe interface. This innovative add-on board transforms your Raspberry Pi into a high-performance computing powerhouse, thanks to its compatibility with M.2 NVMe SSDs. The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe SSD and AI accelerators (if it is compatible) to Raspberry Pi 5‘s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from the NVMe drives and other PCIe accessories.

 

 

As many of us know, Raspberry Pi 5’s single-lane PCIe 2.0 interface is exposed on a 16-pin, 0.5mm-pitch FPC connector: the M.2 HAT+ M-key is a mechanical adapter board that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M-key edge connector, in the 2230 and 2242 form factors. It is capable of supplying up to 3A to connected M.2 devices.

 

The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ specification and is autodetected by the latest Raspberry Pi software/firmware. The standard Raspberry Pi M.2 HAT+ is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.

The Raspberry Pi M.2 HAT+ Compact is designed for use with the Raspberry Pi Case for Raspberry Pi 5. The Compact form factor enables you to connect M.2 M-key peripherals with the 2230 form factor to the Raspberry Pi 5, while allowing space for the case’s integrated cooling fan.